Thermal Arc TA-8/300-KAT, Instruction Manual

Page: 22 / 41

22
8. WARNING
SPARKS CAN CAUSE BATTERY GASES TO EXPLODE
BATTERY ACID CAN BURN EYES AND SKIN
- Stop engine before disconnecting or connecting battery cables.
- Always wear a faceshield and proper protective cloting when working on battery.
- Do not allow tools to cause sparks when working on battery.
1. Place the engine control switch in the STOP position.
2. Remove bolts and pull out tray.
3. Connect the cables.
4. Reinstall battery tray.
ENGINE FUEL CAN CAUSE FIRE OR EXPLOSION.
- Stop engine before fueling.
- Do not fuel while smoking or near sparks or flames.
- Do not overfill tank-clean up any spilled fuel.
REMOVE FUEL CAP SLOWLY-FUEL SPRAY MAY CAUSE INJURY.
FUEL MAY BE UNDER PRESSURE.
Rotate fuel cap slowly and wait until hissing stops before removing cap.
Check all fluids daily. Engine must be cold and on a level surface.
Add fresh fuel starting engine the first time.
Wipe dipstick clean and check oil : if oil is not up to full mark, add oil.
Stop position
Full
Diesel only
Full
ref TA270H6.TIF
ref. TA270H7.TIF ref. TA500D8.TIF