17
8
Remote Control AMPERAGE / VOLTAGE Switch - This selector switch determines the
adjustment of Amperage/Voltage. In the PANEL position, Amperage/Voltage is controlled
by the front panel control knob. For remote Amperage/Voltage control, set the switch to
REMOTE 14 for control through the 14 pin receptacle with a remote Amperage/Voltage
device.
9
Serial number
10
Welding Receptacle Electrode: Positive output welding connection for CC (Constant
Current) and CV (Constant Voltage).
11
115V 3A Circuit breaker - Push to reset. Controls 115V power source for wire feeders
controlled through 14 pin receptacle.
12
14 Pin receptacle - Used for remote Contactor , amperage controls wire feeder control.
13
Welding receptacle Work: Negative output welding connection for CV (Constant Voltage)
MIG.
14
Welding Receptacle Work: Negative output welding connection for CC (Constant Current)
STICK.
Summary of Contents for TA-8/300-KAT
