Thermal Arc 281 FABRICATOR, Service Manual

Page: 81 / 108

FABRICATOR 281 WELDING MACHINE
Manual No. 0-4880B -1 PARTS LIST
SECTION 9:
PARTS LIST
9.01 Equipment Identification
All identification numbers as described in the
Introduction chapter must be furnished when ordering
parts or making inquiries. This information is usually
found on the nameplate attached to the equipment. Be
sure to include any dash numbers following the Part or
Assembly numbers.
9.02 How To Use This Parts List
The Parts List is a combination of an illustration and a
corresponding list of parts which contains a breakdown
of the equipment into assemblies, subassemblies, and
detail parts. All parts of the equipment are listed except
for commercially available hardware, bulk items such
as wire, cable, sleeving, tubing, etc., and permanently
attached items which are soldered, riveted, or welded
to other parts. The part descriptions may be indented to
show part relationships.
To determine the part number, description, quantity, or
application of an item, simply locate the item in question
from the illustration and refer to that item number in the
corresponding Parts List.
PART NUMBERS:
Fabricator 281
Package System Part Number W1001600
Power Source Part Number 707300