en-us
11
Sabbath mode
When Sabbath mode is switched on, the following
settings are switched off:
■
Acoustic signal
■
Interior light
■
Messages on the display panel
■
The background illumination of the display panel is
reduced.
■
Buttons are locked.
Switching on
1. Press and hold down the setting button
@
.
2. Press Vacation button.
3. Press button
@
and hold down for a further
3 seconds.
The
VACATION
symbol flashes on the display panel
and SABBATH is displayed.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
Humidity function
The air humidity in both climatic zones can be
increased independently of each other.
Switching on
1. Press setup button.
2. Press selection button
¿
until
HUMIDITY
and
the current setting (
ON/OFF
) are displayed for
the particular climatic zone.
3. Press the setting button
@
, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
HUMIDITY
is displayed in the display panel.
Switching off
1. Press setup button.
2. Press selection button
¿
until
HUMIDITY
and
the current setting (
ON/OFF
) are displayed for
the particular climatic zone.
3. Press the setting button
A
, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
HUMIDITY
goes out on the display panel.
Alarm function
Switching off the warning signal
Press the “alarm” button to switch off the warning
signal.
Door alarm
The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.
