Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
58300000154022_ARA_EN_D
Page 55 of 68
5. Detach the bottom plate of the front frame. First remove and retain
the larger T-20 screws, and then remove and retain the smaller
T-20 screws (see Figure 103).
Figure 103: Screws on Bottom Plate of Front Frame
6. Remove and retain the five T-20 screws from around the rim (not
the center) of the cavity base (see Figure 104).
Figure 104: Screws on Rim of Cavity Base
7. Lift the cavity base slightly up and then out (towards you). Be
careful not to scratch the porcelain finish of the cavity.
8. The deflector (flame spreader) is attached to the cavity base. Only
detach the deflector if it needs replacing by removing and
retaining the four T-20 screws from the center of the cavity base
(see Figure 105, page 55).
Caution
Set the cavity base on a flat, protected surface so that the deflector
does not get bent, and so the screws don’t damage any surface.
Figure 105: Deflector Attached to Cavity Base