Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
58300000154022_ARA_EN_D
Page 46 of 68
3. From the back of the range, detach the three wire connectors
(see Figure 79).
Figure 79: Wire Connectors (Typical Fan Shown)
Sharp Component
– Use Gloves
Use gloves as the fan has sharp edges
4. From the two access holes in the chassis (see Figure 80), use a
long T-20 driver to remove the screws that secure the cooling fan
onto the bracket if they cannot be removed from the back of the
range (see Figure 78, Figure 80 and Figure 81).
5. Using gloves, remove the cooling fan.
6. Replace the cooling fan if needed.
Figure 80: Cooling Fan Access Holes in Chassis (Typical Range
Chassis Shown)
Figure 81: Removing Cooling Fan Screws