English 2
California Safe Drinking Water and Toxic
Enforcement Act (Proposition 65) Notice:
WARNING:
This product contains or, through ordinary use
for its intended purpose, facilitates emission of a
chemical or chemicals known to the State of
California to cause cancer and/or birth defects
or other reproductive harm. To minimize
exposure to these chemicals:
1.
Perform the LP conversion according to the
instructions in this manual.
2.
The conversion and adjustment to the burners should
be done by a certified installer or agency to ensure
proper combustion.
3.
Always operate the unit according to the instructions
provided with your Range or Cooktop.
4.
Ensure proper ventilation with an open window or use
a ventilation fan or hood when cooking with Gas.
Conversion Instructions
Before You Begin
CAUTION:
Before proceeding with the conversion, shut off
the gas supply to the appliance prior to
disconnecting the electrical power.
Tools Needed:
•
Scissors
•
7mm -or- 9/32” socket with 1/4” driver & extension
•
T-30 -or- T-27 Torx driver
•
4mm hex Allen wrench
•
Large, slotted screwdriver, 0.40” X .050” blade
•
Extra large, slotted screwdriver, 0.60” X .060” blade
•
7/8” wrench -or- 7/8” socket & drive
•
T-20 Torx driver
•
Precision screwdriver, 1/8” X .020” blade
•
Soap & water mixture -or- leak-check solution
CAUTION:
When connecting the unit to propane gas, make
certain the propane gas tank is equipped with its
own high pressure regulator. The maximum gas
pressure to this appliance is not to exceed 14.0
inches water column from the propane gas tank
regulator.
Table 1: Conversion Kit Contents
Description
Service
Number
Quantity
PALPKITHC
Instructions
553122 1
Foam Tape, 1” piece
418145
1
Propane Conversion
Label
418146
1
Plastic Bag
418148
1
Star Burner Jet
Orifice
617163
6
This Propane Conversion Kit contains the quantities of
parts indicated above; however, some orifices will not be
used depending upon the size of the appliance being
converted to LP Gas. Refer to TABLE 2 for a list of
appropriate quantity of orifices to be used for each
model.
