Page 8
9. Check all light bulbs to make
sure they are secure in their
sockets. Turn power on in the
service panel. Install filters.
Check light and blower
operation. Leave this manual
for the home owner.
Alternate Installations
Reduced Ceiling Height
Installation for HNW model:
The hood may be installed with
only the lower part of the duct
cover to reduce the overall
height. This hood height is
signified by
*
in Table 1.
1.
For the duct cover to slide
down and engage the top of
the hood position the duct
cover bracket 1" below the
ceiling.
2.
Fill in the gap between the
ceiling and top of the
chimney with a 1" thick
piece of wood cut to the inside
cross section of the chimney
cover.
3.
Finish the wood to match the
ceiling.
4.
Copy the two mounting holes
on the sides of the upper
cover to the lower cover.
5.
Install lower cover on hood
and secure to mounting
bracket with two sheet metal
screws.
Rear discharge
For rear discharge a 90 degree
elbow may be installed immedi-
ately above the hood. The
distance from the bottom of the
hood to top of the transition is
provided by dimension "
T
" in
Table 1.
