Page 7
4. Secure hood with 2 screws on
top and 2 screws on bottom.
See Fig. D.
5. REMOTE VENTILATOR AND
DUCT INSTALLATION. Refer to
instructions shipped with
remote ventilator model
VTR1000Q or VTR1400Q for
installation of remote blower
and ducting. The remote
ventilator inlet fits 10" round
duct. Transition to 8" round
prior to passing through ceiling
or wall for duct cover clearance
and connecting to the hood
transition. Do not use ducting
smaller than 8" round.
6. Connect ducting to transition
using starter collar provided
with hood (See Fig. C). Locate
collar screws so they fit into
corner of the duct cover.
Secure collar to transition and
duct with three sheet metal
screws each. Seal with duct
tape.
7.
Install wiring for
remote ventilator and
power supply. See
electrical installation on
page 7.
8.
Install duct covers
on top of hood as shown
in Fig. B. Raise inside
cover and attach to duct
cover bracket using two
sheet metal screws
provided.
Appliance Installation:
1. Install transition on top of hood
if removed for shipping. Fig. C
2. Hang hood on 2 mounting
hooks through the rectangular
cutouts on back of hood. Fig. D
3. Level the appliance shown in
Fig. D.
13
Starting
Collar
Fig. D
Fig. C
1"
