Thermador CJ302B, Service Manual

Page: 43 / 121

CJ Oven Service Manual Lit. No. 94-30-007A
Page 42
c) Remove the screws from the four insu-
lation cover brackets and the four glass
assembly clamps and remove the
brackets and clamps.
b) Remove the insulation strip from
around the center glass assembly.
d) Lift the center glass and frame out of
the liner. CAUTION: The center glass
is heat-treated on both sides. If you re-
move both the center and inner glass,
be sure to install the heat-treated glass
in the center glass position.
Center Glass Assembly
4 Brackets
2 Clamps
2 Clamps
c) Lift the inner glass off the oven door.
CAUTION:
The inner glass is not heat-
treated like the center glass. Be sure to
install the untreated glass in the in-
ner glass position.
7. To remove the RF screen and the inner
glass:
a) Remove the bottom insulation from the
door.
b) Remove the forty-eight screws from the
screen and remove the screen from over
the inner glass . REASSEMBLY NOTE:
Make sure that you position the screen
with the best side showing through the
inner glass.
Insulation Strip
Inner Glass
Insulation (Rope)
Continued on the next page.
Insulation
RF Screen
d) If you need to replace the insulation
“rope” that is under the inner glass,
pull it out of the track and install the
new one in its place. REASSEMBLY
NOTE: Make sure that the end strands
of the insulation do not show through
the inner glass when you reinstall the
glass.