Thermador CJ302B, Service Manual

Page: 29 / 121

CJ Oven Service Manual Lit. No. 94-30-007A
Page 27
9. To remove the high-temp cutout:
a) Use an angled 1/4˝ socket and remove
the two hex-head screws from the
high-temp cutout bracket. Pull the cut-
out forward as far as the wires will al-
low.
b) Disconnect the wires from the termi-
nals.
10. To remove the monitor and secondary
switch assembly:
Note: We have placed 2 access holes on
the relay board partition to remove the 2
left side latch screws.
a) Remove the four screws and
lockwashers from the switch assembly.
Pull the assembly forward as far as the
wires will allow.
b) Disconnect the wires from the switch
terminals.
Hex-Head Screws
High-Temp
Cutout
BK-33
BK-34
Secondary Switch
Monitor Switch
Screw &
Lockwasher
(1 of 4)