OPERATING THE THERAPURE
®
TPP100
Before using the Therapure
®
air purifier, please read the following important information.
Safety
1. Do not place near fans.
2 Do not place the unit near curtains.
3. Do not place any object on top of the unit.
4. Keep both sides of the unit at least 1 foot away from a wall.
5. Placing the unit close to the source of air pollution is an effective way
to improve indoor air quality.
Note:
DO NOT run the Therapure
®
TPP100 with a broken filter. Replace the filter if the filter has
a tear or a hole in it.
If the filter is damaged or needs replacement, please visit the Therapure
®
website at
www.envionproducts.com
to order for a replacement filter. Or call
1.800.875.8577
.
OPERATING THE THERAPURE
®
TPP100
CONTROLS/SETTINGS:
Power Control
– To operate the Therapure
®
air purifier, press the ON/OFF button to turn on the air
purifier to the LOW spreed setting. Press the button again to turn the unit to HIGH speed. Press the
button again to turn the unit off.
Clean Speed Control
– The Therapure
®
air purifier has two different speeds of cleaning, LOW and
HIGH. Press “ON/OFF” button to cycle the settings and select the fan speed you desire. On LOW,
clean speed indicator A will light up. On HIGH, clean speed indicators A & B will light up.
1.
2.
3.
5.
4.
Control Panel
Power Button
Clean Speed Indicator B
Clean Speed Indicator A
TPP100
7
6
