8
E. Remove the inflation hose from the air valve and replace valve cap tightly.
F. Insert one filter cartridge into the mesh filter cartridge cover and screw the filter cartridge onto
the water inlet on the spa wall by turning it clockwise. Store the second filter cartridge for later
use. Retain the filter cartridge cover to use with replacement cartridges – do not discard.
G. Fill the spa using a garden hose to the water level printed on the spa wall.
H. Place the cover onto the spa and fasten zipper.
WARNING: This cover is not designed as a safety cover and is NOT a replacement for adult supervision.
RISK OF ACCIDENTAL DROWNING. ALWAYS LEAVE THE COVER IN PLACE AND LOCKED WHEN THE
SPA IS NOT IN USE. EXTREME CAUTION MUST BE EXERCISED TO PREVENT UNAUTHORIZED ACCESS
BY CHILDREN. TO AVOID ACCIDENTS, ENSURE THAT CHILDREN CANNOT USE SPA UNLESS THEY ARE
SUPERVISED AT ALL TIMES.
I. Install cover lock. The combination lock is factory preset to 0-0-0. To change the combination, push and hold the
button down, then advance each number to the desired combination. Once a new combination is chosen, insert
the lock wire and release button.
DANGER
F.
G. - H.
