7
WARNING:
Do not use the spa if the above test fails.
B. Open the air outlet on the spa. Screw one end of the inflation hose onto it.
C. Open the air valve on the spa. Connect the other end of inflation hose into the valve.
As previously outlined under the GFCI Test section, test the spa’s GFCI plug.
D. Inflate the spa tub by pressing the BUBBLE button.
When the spa is properly inflated, press BUBBLE again.
• Do not over inflate.
• If you need to add additional air to the spa after it has been filled with water, you must first turn on the jet function for 2-3 minutes
by pressing BUBBLE. Then follow instructions in steps B-D above.
1.
B.
C.
D.
2.
3.
