ADJUST FEED SYSTEM
This system is for service technicians only. It is used to alter the amount the chlorine or
acid fed into the pool over a given period of time. Adjustment of these settings can result in
incorrect operation for the pool size and alteration should not be attempted unless advised
by
Theralux Advanced Mineral Pool Systems.
Dis/Enable Shutdowns
Turns any protective shutdowns on/off. For example if the pH goes below 5.9
Chlor Dose Pump ON/OFF
If the unit is being used to control a salt chlorinator it is also possible to run a chlorine dose
pump as a back-up. The dose pump can be turned on/off from this menu.
Auto Mode and Full Manual (MAN/AUTO) Menu
Full Manual Mode (FMM)
FMM is used when an external timer is controlling the unit.
If FMM is selected, the pump system is either turned ON or OFF whenever power is
supplied to the Unit. The Unit
’s timer is effectively disabled.
The LCD will indicate that the Unit
is in manual mode with either the message “Man ON” or
“Man OFF”.
AutoMode
When running in Auto Mode, the Unit has up to 4 adjustable Filter Cycles. Factory default
settings have Filter Cycle 1 and Filter Cycle 2 enabled.
Filter Cycle 1 is always enabled. The other 3 Filter Cycles can be enabled or disabled (in
order) allowing you to increase or decrease running times quickly without adjusting the
Filter Cycle ON/OFF times
– simply add or remove cycles.
When you first turn on the Unit in AutoMode, the pump will be off even if the time is in the
middle of a programmed Filter Cycle. The Unit will wait for the next available ON-time to
start the pump and the rest of the system.
If there is an extended power failure, the Unit will continue to keep time for a number of
days. During this time the pump ON/OFF-times will still be checked. When power is
restored, the system will wake up and turn the pump ON if it is during a Filter Cycle.
Automatic Operation
In AutoMode, Line2 of the LCD will display whether the Pump is ON or OFF and the next
OFF or ON time.
Manual Operation while In AutoMode
You can override the AutoMode settings manually by pressing either the ON button (to turn
ON if the system is off automatically) or OFF to stop the pump if it is on automatically. The
Unit is still in AutoMode and will respond to the next AutoOFF/ON time.
Summary of Contents for Water Management System
Page 1: ...Water Management System Advanced User Manual...
Page 5: ......
