TLC-
2000
THERAPEUTIC MEDICAL LASER
Document: 600-0013
28
Treating the Patient
From the main menu, select the advanced treatment tab. The Patient Menu will open. Enter the patient name to search for
the patient. The patient’s name will be listed. Select the patient and select the To Diagnoses button. Select the condition to
be treated. Select a Laser Probe and turn it on. The Laser Probe will initialize and go into the Idle mode waiting for
commands from the tablet.
Select the Laser Probe window that is color matched to the probe. Select the Treatment Mode. The Laser Probe will Beep
and go into the ARMED state.
Place the Laser Probe on the area of the patient to be treated. Start the treatment by pressing the Start button on
the software or the black Start pushbutton on the Laser Probe once. The laser diodes will turn on and the time will
start to decrement. When the time reaches 0:00 the laser diodes will turn off and the Laser probe will return to the
Armed state.
At this point the Laser Probe can be turned off or another treatment cycle can be started by pressing the Start button
when the treatment is finished. Exit the treatment mode by touching the Finish Treatment button on the Tablet in the
Laser Probe window. The Laser Probe can be turned off at this point.
Summary of Contents for TLC-2000 Series
Page 1: ......
