ThePondguy LEDPro Series Product Manual Download Page 4

View other great products on-line at www.thepondguy.com

MAINTAINING YOUR

 

LEDPRO

 LIGHTS:

 WARNING: 

Before performing any maintenance, always unplug the LEDPro™ Lights from the 

power source.
CLEAN lenses regularly to remove algae/debris buildup that will reduce light intensity.
CLEAN with a soft cloth or brush with water, or a descaler if needed. When using a 

descaler be sure to rinse components well before reinstalling. 

One or more lights fail to illuminate: 

  •  Check connection from Light(C) to Splitter(B)  
  •  Inspect Lens(D) for algae/debris accumulation  
  •  Ensure bulb is properly seated in housing 
  •  Replace bulb (3-Watt light set only)
All lights fail to illuminate: 

  •  Make sure Transformer(A) is properly seated in electrical outlet
  •  Make sure electrical outlet provides power
  •   Check Splitter(B) to Transformer(A) connection
  •   Check connections from Lights(C) to Splitter(B)
  • Ensure bulbs are properly seated in housing and check photocell 
Lights stay on during the day: 

  •  Make sure photocell is upright, unobstructed & exposed to sunlight 

LEDPro™ Series High Output Lights carry a 3-year warranty. 

The Pond Guy® will repair or replace any units found to be 

defective. This limited warranty is extended exclusively to 

the original purchaser and begins from the date of original 

purchase receipt. Abuse or misuse of this product or 

power cord alterations void all warranty. Please call for  

a Return Authorization Number prior to returning  

product by calling our Customer Care Department at  

866-766-3435. Failure to request an RMA number may 

result in delay or dismissal of your warranty claim.

 THANK YOU FOR CHOOSING:

The Pond Guy

®

 Inc.

We Know Ponds

15425 Chets Way

Armada, MI 48005

866-POND-HELP (766-3435)

thepondguy.com

DESCRIPTION

ITEM 

NUMBER

LEDPro ™ 3-Watt Replacement Bulbs

(Choose from red, blue, yellow, warm white, cool white. Warm white comes standard)

 

120812

ThePondGuy® Colored Lens Set for LEDPro™ Mini 1-Watt 

(Comes with red, blue, yellow & green lenses )

 

190135

20’ Extension Cord

(Maximum of 1 extension should be added per light)

110525

Summary of Contents for LEDPro Series

Page 1: ...llingYourLEDPro Lights 3 MaintainingYourLEDPro Lights 4 Troubleshooting 4 WarrantyInformation 4 Table of Contents For Models LEDPro Mini 1 Watt Light Kit 3 Pack Item 120813 LEDPro 3 Watt Light Kit 3 Pack Item 120810 LEDPro 6 Watt Light Kit 3 Pack Item 120817 LEDPro 12 Watt Single Light Item 120828 ...

Page 2: ... may overheat if the cord is rated for less amperes or watts than the unit rating DO NOT immerse the LEDPro Light s plug in water or attempt to use a wet plug The LEDPro Lights are NOT suitable for use in swimming pools swimming ponds or other situations where bodily contact is made with the water Important LEDPro Lights may be used in or out of water When used in open air application unplug the l...

Page 3: ...he Splitter B cord into the Transformer A and tighten plastic retaining nut Step 3 Place Lights C in desired locations Step 4 Make sure Photocell E is located out of the water in an area exposed to natural light Step 5 Plug the Transformer A into a standard 110 volt outlet with GFCI B E A 3 16 16 16 C D LEDPro 1 3 6 Watt Light Kits A Transformer B Splitter C Light D Lens E Photocell E A 16 C LEDPr...

Page 4: ... photocell Lights stay on during the day Make sure photocell is upright unobstructed exposed to sunlight PRODUCT WARRANTY LEDPro Series High Output Lights carry a 3 year warranty The Pond Guy will repair or replace any units found to be defective This limited warranty is extended exclusively to the original purchaser and begins from the date of original purchase receipt Abuse or misuse of this pro...

Reviews: