INSTALLING YOUR
LEDPRO
™
LIGHTS:
DO NOT TAMPER WITH POWER CORD.
Lights may be placed in or out of water.
Plug the two-pin connector on the end of each Light(C) cord into the Splitter(B) and
tighten plastic retaining nut.
Plug the two-pin connector on the end of the Splitter(B) cord into the Transformer(A)
and tighten plastic retaining nut.
Place Lights(C) in desired locations.
Make sure Photocell (E) is located out of the water, in an area exposed to natural light.
Plug the Transformer(A) into a standard 110 volt outlet with GFCI.
(B)
(E)
(A)
|-------3’-------|
16’
16’
16’
(C)
(D)
LEDPro™ 1, 3 & 6-Watt Light Kits
•(A) Transformer
•(B) Splitter
•(C) Light
•(D) Lens
•(E) Photocell
(E)
(A)
16’
(C)
LEDPro™ 12-Watt Single Light
(D)
6’
6’
6’
6’
3’
(B)
15425 Chets Way | Armada, MI 48005
3
