THEORY DLC-250.4 Installation And Programming Manual Download

Page: 5 / 22

DLC-250.4 LOUDSPEAKER CONTROLLER

Introduction and Overview

2.4 Firmware

This manual describes the features, functions and user interface of THEORY
DLC amplifiers running

Firmware Version 1.2.0.

It is strongly recommended that the firmware version
installed in the amplifier in use is checked initially, and
regularly thereafter. If updated firmware is available,
the amplifier should be updated as a priority.

The firmware installed in the amplifier can be identified and updated by
selecting the

Device

option in the Control web app

Settings Menu

Firmware versions can be checked, and firmware downloaded, from the
THEORY DLC website: www.theoryaudiodesign.com.

3. Carton Contents

THEORY DLC

amplifiers are shipped in a cardboard carton containing the

amplifier unit, a mains cable appropriate for the sales territory, an accessory
pack, and a document pack. The full contents is listed below.

• Amplifier unit
• Mains power cable
• Input connector x 2
• GPIO socket connector
• Output connector x 2
• Adhesive rubber feet x 4
• Document pack

Summary of Contents for DLC-250.4























Search results

Summary of Contents for DLC-250.4

Reviews:

Related manuals for DLC-250.4

Brands by name

Popular brands

THEORY DLC-250.4, Installation And Programming Manual

Search results

Summary of Contents for DLC-250.4

Reviews:

Related manuals for DLC-250.4

Brands by name

Popular brands