DLC-250.4 LOUDSPEAKER CONTROLLER
14
Configuration
Diagram 5i
Settings Tab menu
Diagram 5j
Speaker Library Creation and Management
Library name - type to edit
Library version - type to edit
Import preset data (.zcp) to library
Creat new library
Rename library
Edit or delete library
Note: In automatic mode, the peak limiter parameters adjust
automatically in response to Crossover & Gain high-pass filter
settings.
•
The
Output Mode
preset menu enables individual amplifier outputs to
be switched off or configured for Lo-Z or Hi-Z modes. In Hi-Z modes,
a high-pass filter can also be configured and applied to the output. The
number of outputs available will depend on the amplifier model, input
setup and zone setup. For example, a two output amplifier will have two
outputs available if Lo-Z mode is selected but only one output available
if Hi-Z mode is selected.
Note: Use of a high-pass filter with Hi-Z mode loudspeakers
is useful to avoid the possibility of distortion caused by low
frequency line transformer saturation. Begin with the default filter
setting of 70Hz. If low frequency distortion is still audible, increase
the frequency setting one step at a time until the distortion is no
longer audible.
5.3.5 Settings Tab
The
Settings Tab
enables miscellaneous amplifier settings to be configured
and installation data to be recorded. The Settings Tab provides access to
further sub-menus.
Diagram 5i
illustrates the
Settings
Tab.
•
The
System Information
menu provides text fields for the recording
of installation data.
•
The
Device
menu records amplifier specific information such as the
model number and firmware version. A firmware update routine and
identifier button can also be found under the Device menu.
•
The
Backup & Restore
menu enables amplifier configuration data
to be downloaded to an external archive, and enables previously
saved configuration files to be uploaded and adopted by the currently
connected amplifier.
•
The
Speaker Library
menu enables management of speaker preset
libraries. Existing libraries of speaker preset files (.zcl) can be created
or imported, and existing libraries edited or fully deleted.
Diagram 5j
illustrates the creation and management of speaker preset libraries.
•
The
Power Management
menu enables various automatic switch-
on options to be engaged. The Power Management menu also offers
timed Standby and Mute functions.
•
The
GPIO
menu enables configuration of the multi-purpose GPIO
interface pins.
