129
The Thecus IP storage can act as an Nsync server, enabling another Nsync-equipped
Thecus NAS at a remote location backup their files to this Thecus IP storage. From
the System Network menu, choose the Nsync Target item, and the Nsync
Target Server screen appears.
Nsync Target Server Setting
Item
Description
Nsync Target Server
Enable or Disable Nsync Target support.
Nsync Target (Does not apply to the 3X series)
From the Backup menu, choose the Nsync Target item, and the Nsync Setting
screen appears. Enable or Disable your Nsync Target Server. Press Apply to confirm
your settings.
If the Thecus Nsync feature has chose to use Rsync to replicate data between two
systems. For the target side to allow source cross data, the Rsync target server
needs to assign a username and password for authentication.
Once Nsync Target has been enabled, the other Thecus NAS product is able to
operate remote replication to this NAS system.
Dual DOM (
Not available on N3200XXX/N0503/N4200Eco/N7700/N8800 NAS
)
The unique Dual DOM feature can now perform “Auto Repair”. The Thecus NAS will
backup up to five versions of the system configuration either by the default timing of
1:00am every day automatically or as scheduled by the user.
This unique “Auto Repair” will be triggered if the primary DOM has a booting issue.
In this instance, the 2
nd
DOM will take over the boot function. Then, the system will
automatically load the most recent system configuration backup image to repair the
primary DOM.
NOTE
To enable Nsync task to go thru firewall, you have to open port TCP/1194 on
your firewall in both directions.
Summary of Contents for 1U4200XXX
Page 42: ...42...
