8
Store
Programming the switching time
Switching times for lighting systems, machines,
ventilation systems, alarm systems etc.
Formation of day groups
If the same switching times are active on sever-
al days of the week, they occupy just
one
memory location.
42
memory locations are
available, e.g. Monday – Friday 7.30 hrs
ON
.
Group formation:
In answer to the text que-
stion Copy, decide by pressing the
key
that the day program should be copied to ano-
ther day of the week. The
Mixed program-
ming
of switching, pulse and cycle times is allo-
wed.
When programming an
ON
and
OFF
switching time, e.g. 9 AM, a switch-
off at 9 AM always has priority.
Program review:
Following programming the timer
makes a program review back to
midnight and then sets the correct
switching status.
Example:
Switching on the lighting of a sports
hall on Mon., Tues., Thurs., Fri. from 7.30h until 12h.
Programming example:
Select
Prog
by pressing the
key.
Store your selection by pressing the key.
Select
New
by pressing the or .
Store your selection by pressing the key.
Select ON or OFF by pressing or .
Store your selection by pressing .
Set the hours and minutes by pressing the or
key.
Store selection by pressing .
To store one day of the week only:
Select weekday by pressing or .
Select store by pressing .
Store by pressing .
To copy to other days of the week:
Store
copy
by pressing .
Select weekday by pressing or .
Store by pressing .
To leave out a day of the week, skip by pressing
the key.
Finally select the
store
display by pressing .
Store your selection by pressing .
