5
• Pass the mains supply and load cables into the holes provided
on the LEDPROCAM’s back cover ensuring that a cable gland,
grommet or sealing compound is used to maintain the
IP rating. Ensure the relevant terminals are correct, the polarity
is observed and that all bare conductors are sleeved
(see section 7. Connection Diagram).
Locking bar
bar with one
with the other
to reconnect).
Jumper Plug
• Attach the jumper plug for the LEDPROCAM to the socket
connector of the LEDPRO floodlight.
DO NOT FORCE. THE PLUG AND SOCKET WILL ONLY FIT ONE
WAY AROUND.
• Reattach the x6 back cover holding screws to secure the cover
to the main housing as shown above.
230V 50Hz Mains Supply
