4
Note this procedure should be carried out when the
luminaire is detached from the wall. Brackets for 10W, 20W
LEDPRO floodlights included.
6. Installation
• Ensure the mains supply is switched off and the circuit supply
fuses are removed or the circuit breaker is turned off.
• Remove the floodlight from the wall bracket if already in place
on the wall, unfasten the cover of the LEDPRO floodlight by
removing the x4 screws as shown below.
• Remove the x6 back cover holding screws so that the cover
splits away from the main housing as shown below. Connect
the x4 holding screws supplied with the LEDPROCAM to
secure the camera module to the floodlight.
x6 back cover
holding screws
(Pre-Attached)
x4 module holding screws
(Supplied in Poly Bag)
