background image

6

Hour counter

The operating hours of the channel (relay) are displayed and 

deleted in the OPTIONS menu. If the number of operating 

hours exceeds the value set in the Service menu, SERVICE will 

appear in the display. 

Example: Replace a lamp after after 5,000 h.

¾

†

Delete operating hours or set a higher value in Service (e.g. 

to 10,000 h)

Using the OBELISK top2 memory card

All functions can also be set on the PC using the OBELISK 

software and transferred to the device via the memory card.

¾

†

Insert memory card in the time switch

¾

†

Read in/out saved switching times and device setups in 

the time switch or start Obelisk program

¾

†

Remove memory card after copying etc.

 

!

Avoid mechanical overload and contamination during 
storage/transport

 

L

PC software OBELISK top2 available at 

www.theben.de

Copying OBELISK → TIME

This copies the switching program and optionally all time 

switch settings (e.g. external input, time format etc.) from the 

memory card in the time switch.

Copying TIME →OBELISK

This copies all switch programmes and settings from the time 

switch to the memory card.

Starting OBELISK program

Takes on the switching times that are programmed on the 

memory card.

As soon as the memory card is removed, the switching times 

of the time switch are re-activated.

u

u

u

OBELISK

COPY

OBELISK -> 

TSWI

COPY TSWI 

-> OBELISK 

RUN 

OBELISK 

CHECK 

OBELISK

OVERWRITE 

OK

OVERWRITE 

OK

Resetting the time switch

¾

†

Press the 4 buttons simultaneously

 

You can choose between KEEP PROGRAM and DELETE 
PROGRAM

6.  Technical data

Operating voltage: 

12 - 24 V, +10 % / –15 % 

12 - 24 V DC, +10 % / –15 %

Frequency: 

50–60 Hz

Power consumption: 

0,9 W - 1,3 W

Max switching capacity: 

16 A (at 250 V, cos 

ϕ

 = 1)

switching capacity: 

2 A (at 250 V,  cos 

ϕ

 = 0,6)

Min. switching capacity:

10 mA/230 V AC

100 mA/ 24 V AC/DC

Shortest switching time: 

1 second

Protection rating:

IP 20 in accordance with EN 

60529

Protection class: 

II in accordance with  

EN 60730-1 subject to designa-

ted installation for supply with 

FELV and/or mains switching

Protection class:

III for supply with SELV and 

switching of SELV

Operating temperature: 

–30 °C … +55 °C

Power reserve: 

10 years at +20 °C

Time accuracy:

 ±0,25 s/day (25 °C)

Rated impulse withstand voltage: 

4 kV

Pollution degree: 

2

Contact: 

two way switch

Glow lamp load (230 V): 

1400 W

Halogen lamp load (230 V): 

1400 W

Fluorescent lamp load: uncorrected 

Series corrected: 

parallel-corrected: 

10000 VA

80 W (max. 12 µF)

Compact fluorescent tubes (EVG): 

30 W

LED lamps (<2 W) (230 V): 

6 W

LED lamps (>2 W < 8 W) (230 V): 

20 W

LED lamps (> 8 W) (230 V):

20 W

Approved for switching SELV and mains 

voltage.

7.  Contact

Theben AG

Hohenbergstr. 32

72401 Haigerloch

GERMANY

Tel. +49 7474 692-0

Fax +49 7474 692-150

Hotline

Tel. +49 7474 692-369

[email protected]

Addresses, telephone numbers etc. 

www.theben.de

Reviews: