25
Step 4
4.1 Remove the 4 bolts from the burner.
4.2 Push the gas hose/gas tube into the gas supply connection of the burner.
4.3 Tighten it.
4.4 Now attach the burner to the post with the 4 stainless steel bolts.
Hardware used
Step 5
5.1 Ensure that the post, burner and bolts are connected as described.
5.2 Push the 8 mm washers onto each of the reflector spacers for the
heat reflector.
Hardware used
Step 6
Assemble the heat reflector with 3 bolts from below, put on
the washers from above, then screw on the nuts hand-tight at
first and install the reflector centre with 6 more bolts.
Then tighten all bolts.
Hardware used
Bolts
Cap nut
Washer
Reflector
lid
Reflector part
Bolt
DD
Stainless steel bolt x 4
FF
Reflector spacer x 3
GG
Washer
Ø
8 mm x 6
HH
Washer
Ø
6 mm x 9
II
Bolt M6 x 10 mm x 9
JJ
Cap nut x 9
Reflector spacer
Summary of Contents for 51611010
Page 2: ...2 ...
