P.24
Flying
20
1
Fine tune Elevator and Rudder with sub-trim tab.
2
Fine tune Ailerons with sub-trim tab.
Move Elevator Sub-trim tab up or down to bring elevator in a straight line with horizontal stabilizer.
Move Aileron Sub-trim tab to bring Ailerons in a straight line with Wings.
Move Rudder Sub-trim tab left or right to bring rudder in a straight line with vertical stabilizer.
Try to get an experienced flyer to check through your installation before flying. Ask him/her to do
the first flight for you. He/she can trim out the control surfaces for you so the model can fly straight
and level with control sticks in neutral positions and throttle stick about half throttle. You will get a
much higher successful rate with the help from an experienced flyer.
Before you fly, try to fine fune the control surfaces with Sub-trim tab.
Mode 1
Mode 2
Mode 1
Mode 2
Mode 1
Mode 2
GM080PO30211403
