Read through the manual before you begin
,
so you will
have an overall idea of what to do.
Symbols used throughout this instruction manual comprise of the following : -
1
2
3
Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly. Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement.
The
manufacturer will replace any defective parts
,
but will not
extend to the parts that are
good
before
gluing to defective parts during assembly.
Warranty
will
not
cover
any
parts
modified
by
customer
.
I N D E X
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
BEFORE YOU BEGIN
P.1
P.2
P.3-9
P.9
Apply epoxy glue.
Assemble left and right
sides the same way.
Peel off shaded portion
covering film.
Drill holes with the specified
diameter(here:3mm)
Pay close attention here!
Pierce the shaded portion
covering film.
Apply instant glue
(C.A. glue, super glue.)
Ensure smooth non-binding
movement while assembling.
Cut off shaded portion.
Must be purchased separately!
Do not overlook this symbol!
3 mm
P.1
