1:1 COMPONENT GUIDE
Place
Small O-Ring
over the
Bass Reflex
Port Tube
in
Back
Stand Support Cover
up to the ridge.
20
22
Insert the two remaining
M5 Nuts
into the matching recesses at
the bottom of the inside of the
Front Stand Support
.
21
Position
Back Stand Support Cover
near the
Main Housing
Assembly
and plug the
Speaker Plug
into the
Speaker Plug
Socket
at the bottom of the inside of the
Back Stand Support
Cover
.
IMPORTANT
:
DO NOT
remove the RobCo
Electronics
Cover
. Bluetooth
©
electronics are complex and
sensitive to static shock. Removing the cover will
damage the electronics and void your warranty.
There are no user-modifiable parts under the
cover.
Slot the
Location Hooks
at the
base of the
Back Stand Support
Cover
into the location holes at
the base of the
Front Stand
Support
.
23
Back Stand Support Cover
BOX 2
Small O-Ring
BOX 3
Electronics Cover
M5 Nut
BOX 3
Location Hook
Location Hole
Speaker Plug Socket
1:1 COMPONENT GUIDE
1:1 COMPONENT GUIDE
1:1 COMPONENT GUIDE
Screw two
M4 Screws
into the holes
at the
Base Reflex Port
end of the
Lower Main Housing
. Screw two
M3
Screws
into the holes at the Speaker
end of the
Lower Main Housing
.
17
19
Insert two
Medium M4
Spacer Nuts
into their
slots each side of the
Front Stand Support
Cover
, so that they
push into position,
taking care that they
locate properly and
don’t fall through.
18
Hold the
Front Stand Support
near to the
Main Housing
and poke the
Speaker Cable
and Plug through the
Cross Slit
in the
Foam Seal
and
gently pull the
Speaker Cable
through. Do not over-pull the cable,
otherwise you might strain its connection to the
Speaker
. Then locate
the
Front Stand Support
to the
Main Housing
and secure in position
with four
M5 Bolts
using the Vault-Tec Spanner provided.
IMPORTANT
: The
M5 Bolts
that secure the
Front Stand Support
to the
Main Housing
are
very close to the
Bass Reflex Port
features.
Tighten the bolts carefully, relocating the
spanner after each quarter turn.
M5 Bolt
BOX 3
Medium M4 Spacer Nut
BOX 3
Front Stand Support
BOX 2
Cross Slit
EVA Foam Seal
