Integration manual
PC-010 Bluetooth speakerphone module
Page
8
of 8
PC-010-S-001-v1.0
3.2
CANADA
The PC-010 module is approved for use in Canada under Industry Canada (IC) Radio
Standards Specification RSS-247. Modular approval permits the installation of a
module in a host device without the need to recertify the device.
IC Certification Number: 20592-1701
3.2.1
Labelling and user information requirements
The host device shall be properly labelled to identify the module within the host
device.
The Industry Canada certification label of the module should be clearly visible at all
times when installed in the host device, otherwise the host device must be labelled
to display the Industry Canada certification number of the module, preceded by the
words "Contains transmitter module", or the word "Contains", or similar wording
expressing the same meaning.
The finished product should contain the following or equivalent notice in a
conspicuous location in the user manual, or alternatively on the device, or both:
3.2.2
RF Exposure
All transmitters regulated by IC must comply with RF exposure requirements listed in
RSS-102 - Radio Frequency (RF) Exposure Compliance of Radio communication
Apparatus (All Frequency Bands).
3.2.3
Helpful websites
Industry Canada:
http://www.ic.gc.ca
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference
including in interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
