Integration manual
PC-010 Bluetooth speakerphone module
Page
6
of 6
PC-010-S-001-v1.0
3
Regulatory Information
3.1
UNITED STATES
The PC-010 module has been tested and approved under Federal Communications
Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C "Intentional
Radiators" in accordance with Part 15.212 Modular Transmitter approval. Modular
approval allows the end user to integrate the PC-010 module into a finished product
without obtaining subsequent and separate FCC approvals for intentional radiation,
provided no changes or modifications are made to the module circuitry. The FCC
requires the end user to be notified that any changes or modifications made to the
device that are not expressly approved by The Wand Company may void the user's
authority to operate the equipment. The end user must comply with all of the
instructions provided by the Grantee, which indicate installation and/or operating
conditions necessary for compliance.
The finished product is required to comply with all applicable FCC equipment
authorisations, regulations, requirements and equipment functions not associated
with the transmitter module portion. For example, compliance must be
demonstrated to regulations for other transmitter components within the host
product; to requirements for unintentional radiators (Part 15 Sub- part B
"Unintentional Radiators"), such as digital devices, computer peripherals, radio
receivers, etc.; and to additional authorisation requirements for the non-transmitter
functions on the transmitter module (i.e. Verification, or Declaration of Conformity)
(e.g. transmitter modules may also contain digital logic functions) as appropriate.
3.1.1
Labelling and user information requirements
The PC-010 module is labelled with its own FCC ID number, and if the FCC ID is not
visible when the module is installed inside another device, then the outside of the
finished product into which the module is installed must also display a label referring
to the enclosed module. This exterior label can use wording as follows:
The user's manual for the finished product should include the following statement:
Contains Transmitter Module FCC ID: 2AFJA-1701
or
Contains FCC ID: 2AFJA-1701
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
