Tools Needed:
The Swingset Company
(TSC) team has designed the easiest playset to assemble (in our humble opinion :)
We’ve pre
-drilled all the holes, sanded all the wood, and pre-assembled many of the parts for you. We even
use the fewest variations of fasteners. We hope you find this assembly to be enjoyable and stress -free. But
if you get stuck, don’t hesitate to call us at 888.525.1185. Please let us know your thoughts when you’re
done. Happy Building!
IMPORTANT: These Instructions were written assuming you have firm, level ground or
you have ensured the ground is the same elevation at the points where the posts and A-
Frame legs touch the ground.
See the “Layout Diagram” at the end of this manual for
reference.
If your ground is not the same elevation at all the ground contact points, it will
still be possible to assemble this swing set,
however
you will need to ensure stability of
the swing set (e.g. by attaching 4x4 post extensions where the posts or A-Frame legs may
not be long enough to reach the ground.) TSC does
not
take any responsibility for an
assembly where the ground is not fully level and the elevations at the ground contact
points are not the same.
2
Power or
Hammer Drill
Bubble Level
90
o
Angle
1/2” & 11/16”
Sockets & Wrench
6’ Ladder
Section 1
The Swingset Company
#2 Phillips Head
Screw Driver
