Parts Needed:
Find the box labeled “Supreme Swing Beam
Mounting Parts”. Then find the Fort Bracket.
All the
screws and fasteners required for this section are
found in the “Swing Beam Mounting Parts” box.
On the first fort, place the Fort Bracket over the
upper Crossbeam and between the Posts and
Verticals, as shown. Push bracket down over the
upper crossbeam so it fits snuggly into place.
Secure the bracket using 3 "B" screws, as shown in
Figure P .
Step 1: Attach Fort Brackets
Fort Bracket
Section 3
27
The Swingset Company
x2
x6
B
Figure P
Now repeat Step 1 for the second fort.
Make sure the 2 fort brackets are
exactly opposite each other so that the
large swing beam will lay straight in
between them (next step).
