© The Stone Bake Oven Company 2014. All rights reserved.
Tiles
(flush with hearth)
10mm mortar joints
Ensure 25mm here
(Reduce mortar joint if necessary)
14th brick course
70mm oven base
25mm Calsil board
Add a course of bricks shown on the left
as the inner course, these are added to
the sides and front directly inside the outer
course.
Once the inner course has been laid, add
the outer course of bricks, finish by adding
bricks to the oven base as below.
Ensure a 20mm step is achieved from the in-
ner brick course to the oven base as shown
below.
Stage 12
Stage 13
Once the inner and outer bricks have be laid, you
can place a prefabricated archway (available
from various online retailers) into position ensuring
the internal contour of the arch is perfectly
aligned with the internal oven entrance. Use
mortar under the feet of the arch if it needs raising
slightly. Place some fire cement behind the arch
once it is set in place as shown above.
No mortar required~200mm
Outer brick course
Inner brick course
Ensure 25mm
Pre cast arch
3D Impression
NOT TO SCALE
Outer brick course
Inner brick course
Fillet seal
joining faces
at rear
Alternatively, you can create your own custom
archway using half bricks and cement to brick
around the oven opening. This is often a cheaper
option too!