TROUBLE SHOOTING GUIDE
No lyrics display
on TV.
Connect the VIDEO OUT to VIDEO IN
of the TV.
Using your TV Remote to select
VIDEO input.
Connect from VIDEO OUT of the
system to the VIDEO IN of your VCR
or Connect to an RF Modulator and
then to the TV cable input. Refer to
“
” on
page E8. Check the disc to be sure it
is a CDG. (See Page E17 for details.)
MAKING THE CONNECTIONS
CAMERA OUT Jack is
connected to the VIDEO IN
of the TV.
Source selector on TV is not
set to VIDEO.
Check disc to be sure it is clean. (See
page E13 for cleaning instructions.)
A CDG is loaded but the
CDG indicator is not lit.
TV does not have video line
input.
SOLUTION
PROBLEM
POSSIBLE CAUSE
Set the VIDEO OUT Selector to
“LYRICS” or “ IMAGE”
Position.
VIDEO OUT Selector is in
“IMAGE” position.
Mic volume is set to min.
Adjust mic volume to max. Then back it
off to a comfortable level.
No sound from mic.
Mic is off.
Turn on mic with the ON/OFF switch
located on the microphone.
Image is blurry.
The Camera is facing down. Lift up the Camera.
No image display
on TV.
VIDEO OUT Selector is in
“LYRICS” position.
Set the VIDEO OUT Selector to
“IMAGE” or “ IMAGE” position.
Camera has not warmed up. Wait a minute for the camera to warm up.
Camera Lens is out of focus.
Adjust the lens of the camera by slightly
rotating either left or right until the
display is clear. Do not overturn the lens.
Camera Lens is dirty.
Clean the camera lens.
E15
ENGLISH
