TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locate and remedy the problem.
SOLUTION
Plug in the AC Power Cord.
Turn up the volume.
Turn up the volume at TV/PA
system.
Turn on the power at TV/PA
system.
Follow directions on page E9 for
‘Audio Connection’.
PROBLEM
No power when the unit
is on.
No sound.
POSSIBLE CAUSE
The AC Power Cord is not
plugged in properly.
Volume control is set to
minimum.
Volume control on TV set/PA
system is set to minimum.
TV set/PA system power is
OFF.
AUX OUT jacks not
connected.
Check the outlet with a working
lamp or other electrical appliance.
No power when plugged
in.
The AC outlet may not have
power.
Insert disc correctly.
Wipe clean with soft cloth.
Use a new disc.
Use a new disc.
Only use discs bearing standard
logo as described on page E10.
Disc is inserted upside
down.
Disc is dirty.
Disc is scratched.
Disc is warped.
A nonstandard disc is
inserted.
Moisture has formed inside
the CD deck.
Wait about 20 to 30 minutes to let
it dry out.
CD PLAYER
cannot work normally or
“
”, “
”
displayed.
, or “
” are
aai
aa
aaa
Singing Machine needs to
be reset.
Disconnect the machine from
power source for 30 seconds.
Insert the DC jack into the DC
socket on back of cabinet.
No DC jack connection at
the AC adapter.
Turn off the Singing Machine and
then turn it back on to reset the
Singing Machine.
Lyrics and camera image
are distorted.
The Singing Machine did not
load the lyrics and camera
image properly.
E14
ENGLISHENGLISH
