02/2021 V 1.0
VIEW 01
05/13
To centre the panels, add 1mm Packers
on both sides of Inline Panels in the
Underframe.
Apply the Rigid Seal to dry side of the
Wall Profile starting from the archway
of the Wall Profile up to the top face of
the Wall Profile.
Gently tap the Wall Profile Rigid Seal
into place using a rubber mallet with
the Nylon Block to protect the Glass
and the Wall Profile.
Remove Packers and feed the Wedge
Gasket into the archway gap and trace
along the Glass on both sides.
Spray water on Glass Panel and use
Nylon Block to help feed Gasket.
Flush
Rigid Seal
Glass Panel
17
18
19
20
