03/2021 V 1.0
VIEW 09
Trim
19/20
Attach the Handle if included. Secure in
place with the grub screws provided.
The Handle should be oriented so that
the grub screws are not visible when
looking down on the handle.
Using a sharp modelling knife, trim any
excess gasket material from the Hinges
that may have squeezed out when
tightening.
Take care not to scratch the glass
surface.
Apply the Wall Profile End Cap to the
top of the Wall Profile and fix in place
using self tapping screws.
Tighten all screws.
Fit all Cover Plates to the Hinges.
41
42
43
44
