The Road Wave TRW2 Assembly, Care And Use Instructions Download Page 4

4

SAFETY INFORMATION

SAFETY INFORMATION

SAFETY INFORMATION

Please read and understand this entire manual before 

attempting to assemble and operate the product.

This manual contains information that relates to 

PROTECTING PERSONAL SAFETY and PREVENTING 

EQUIPMENT PROBLEMS. It is very important to read this 

manual carefully and understand it thoroughly before 

using the product. The symbols listed below are used to 

indicate this information.

 DANGER

Potential hazard that

 

will result in serious injury or loss 

of life.

 WARNING

Hazard that

 could result in serious injury or loss of life.

 CAUTION

Potential hazard that 

may result in moderate injury or 

damage to equipment.

 

Note:

 

The word “Note” is used to inform the reader of 

something the operator needs to know about the tool.

WARNING

To reduce the risk of injury, the user must read

          and understand the instructions before using  

          this product.

1.   Prior to installation of this product, the installation 

instructions should be read and completely 

understood. The installation instructions must 

be read to prevent personal injury and property 

damage. Keep these installation instructions in an 

easily accessible location for future reference.

2.   This mount contains small parts which can act as a 

choking hazard if swallowed.

3.  

 CAUTION:

 The maximum load capacity is 30 lbs.

4.   The wall structure must be capable of supporting 

at least five times the maximum load capacity as 

indicated. If not, the wall must be reinforced.

5.   Recommended mounting surfaces: wood stud 

and solid-flat concrete/brick. If the mount is to be 

installed on any surface other than wood studs, solid 

concrete or brick, use suitable hardware.

6.   Make sure no water or natural gas lines are present 

where the mount is to be installed. Cutting or drilling 

into water or natural gas lines could cause personal 

injury or property damage.

7.   When mounting to wood studs, it is recommended 

that a maximum 5/8” particle board be used.

8.    Proper installation procedure by yourself or a 

qualified service technician, as outlined in the 

installation instructions, must be adhered to. Failure 

to do so could result in serious personal injury.

9.   When mounting to a wall that contains wood studs, 

confirm the dead center of the wood stud prior to 

installation, it is recommended that the wood studs 

be a minimum of 16” apart (if applicable).

10.  If you don’t understand these installation 

instructions, please consult an installation 

specialist.

11.   Warning – When using this product basic, 

precautions should always be followed, including 

the following.

12.  Read all the instructions before using the product.

13.   Know how to stop the product and bleed pressures 

quickly. Be thoroughly familiar with the controls.

14.  Keep operating area clear of persons

.

15.   Do not overreach or stand on unstable support. 

Keep good footing and balance at all times.

16.   Follow the maintenance instructions as specified in 

the manual.

17.   To avoid personal injury and/or damage to property 

and to maximize your power washing experience, 

carefully follow all of the safety tips, instructions, 

warnings and safeguards and become familiar with 

all of the controls. 

18.  This power washer conforms to CSA and other safety

       and consumer standards. 

DO NOT

 modify or rebuild

       any part of your power washer.

19.   

 DO NOT

 use your power washer when you are under 

the influence of alcohol or drugs. Use this power 

tool carefully and only when you are alert. 

20.  Watch your balance and footing while using your 

power washer. Surfaces become slippery when wet 

and are extra slippery when using a detergent or 

cleaner.

21.  

NEVER

 operate the power washer in bare feet, 

sandals, or open-toed shoes. 

22.  When using the power washer near children, make 

sure they are closely supervised by an adult to avoid 

injury. 

NEVER

 let a child use the power washer. 

23.  Keep fingers, hands, feet and any part of your body 

clear of the stream of high pressure water. The 

powerful spray can cause blindness or blast holes in 

the skin. It can break a window if you are too close 

when you pull the trigger on the spray gun.

24.  

ALWAYS

 wear eye protection to prevent injury to 

eyes when operating the power washer.

25.  To avoid mishaps or injury, 

ALWAYS

 use the trigger 

Summary of Contents for TRW2



















Reviews: