Section 1
GENERAL INSTRUCTIONS - OVAL POOLS
GROUND PREPARATION
No Diving or Jumping. Observe all Safety Rules
Section
1
e. Insert the left and right gussets. the pieces are marked
“L” and “R”. Ensure that the holes are aligned.
(Image 15)
f. All holes should be lined up at this point. Use the
5/16” x 5” bolts (99-0073) and 5/16” nuts (99-0027) to
connect the channels and to connect the gussets to the
steel uprights.
Remember to include the three-hole
washers (16663) on the front side of the gussets.
(Images 16 & 17) DO NOT TIGHTEN THE BOLTS.
C. CONT. PRE-ASSEMBLY OF THE STRAIGHT SECTION
THREE-HOLE WASHER
15
16
17
Page 20
