Section 4
GENERAL INSTRUCTIONS - OVAL POOLS
ASSEMBLING THE POOL FRAME
Section
4
No Diving or Jumping. Observe all Safety Rules
B. INSTALLATION OF TOP LEDGES AND LEDGE COVERS
1. Install stabilizers and top plates
a. Install the stabilizer on the wall while ensuring to leave a
gap between each end.
(Image 3)
b. Align the upright on the wall and insert the upright clips.
The upright clips snap onto the top of the upright by
applying pressure thus securing the wall and the upright
together.
(Image 4 )
2. Install top ledges
a. Position and place the top ledge on the upright. The top
ledge must be pushed toward the inside part of the pool
and the openings on the top ledge must align with the
holes on the top of the upright.
(Image 5)
b. Insert partially the 3/4 inch screws (6 x V12x34) on the
top. Distribute evenly the space between the top ledges
to center them between the uprights.
c. Make sure to level the two axes of the uprights by push-
ing slightly inwards before tightening the screws perma-
nently.
(Image 6)
Important Note:
Ensure to leave a gap between the two stabilizers.
See Diagram:
Please refer to your pool’s footprint for gap measurement.
3
4
5
6
Page 49
