background image

A. System Components in the Box:
1.

  Fountain Pump with Quick Disconnect, float mount ring and  

Classic Spray Pattern (installed)

2.

 Float - Blue

3. 

Power Cord

4. 

Control Panel

5. 

Crown & Rocket Spray Pattern (interchangeable)

6. 

Geyser Spray Pattern (interchangeable)

B. Prepping the AquaStream™ for Installation:

1)

  Ensure you have power close to your pond. If you don’t, we recommend to ALWAYS use a 

licensed electrician to properly run power down to the pond.

2)

 Mount the Control Panel in a fixed position next to the power source.

3)

 

Choose Your Spray Pattern (Fig. 3)

 

 

a)

  The AquaStream™ comes packaged with the Classic spray pattern installed. However, 

the AquaStream™ includes two additional spray patterns (Geyser and Crown & Rocket).  
Pick the one that best suits you or your special event.

 

b)

  To change a pattern, simply unscrew the nozzle nut, replace the pattern and reinstall the 

nozzle nut.

4) 

 

Assembling the Unit (Fig. 4)

 

a)

 Lay the float flat on the ground with The Pond Guy

®

 logo facing up.

 

b)

 Place the fountain pump assembly into the center of the float. 

 

c)

  Lift the float straight up and ensure that the fountain pump lead power cord passes 

through the center hole. Gently lay the fountain to one side.

 

d)

 Securely attach the power cord to the fountain pump lead quick disconnect.

 

e)

 Attach the power cord strain relief to the loop underneath the float mount ring. (Fig. 2) 

 

f)

   Attach a mooring cable (not included) for each of the two loops underneath the float  

mount ring. (Fig. 2)

 

3. Setup & Installation

Classic

Geyser

Crown & Rocket

Fig. 3

Fig. 4

Unscrew Nozzle Nut to 
change Patterns

Mooring Kit Options:

#651052 – 

 150’ Mooring Kit

#651054 – 

 250’ Mooring Kit

* Mooring Kit Not Included with Fountain

TM

• 2 stakes

• 2 carabiners

• 4 cable clamps

• 150’ or 250’ black vinyl  

coated galvanized cable  
(Mooring Line)

Recommended Mooring Kit

Power Cord

Loop

Loop

Underwater Disconnect

Carabiner

AquaStream™ Floating Fountain

Control 

Panel

Mooring Stake

Fig. 1

Fig. 2

 Mooring Line  

(Vinyl Coated Galvanized Wire)

3A

ENGLISH

Summary of Contents for AquaStream AC05





















Reviews: