The Pond Guy AquaStream AC05, Owner'S Manual

Page: 5 / 20

5. Troubleshooting - Fountain
5. Troubleshooting - LED Lights
IF FOUNTAIN WON’T RUN
ISSUE CORRECTION
GFCI Tripped Reset GFCI
Power Cord Cut Repair or replace power cord
Intake plugged Clean intake
Timer not running Verify timer is keeping time, replace timer if not
Timer trippers are not set correctly Set on / off trippers correctly
Not enough water in reservoir Bring water level up to at least 24” at fountain
Fountain impeller stuck Remove fountain, clean replace impeller
Breaker tripped due to overcurrent Reduce current load on circuit, check other equipment
Breaker tripped to GFCI Check power cord for cuts, replace/repair
IF NOZZLE HAS POOR QUALITY STREAMS
ISSUE CORRECTION
Intake plugged Clean intake
Not enough water in reservoir Bring water level up to at least 24” at fountain
Debris caught in nozzle hole Remove nozzle, clean, replace
Water coming over the float Check fountain float for water, replace if any
IF FOUNTAIN STARTS AND STOPS
ISSUE CORRECTION
Intake plugged Clean intake
Not enough water in reservoir Bring water level up to at least 24” at fountain
IF STREAMS RAISE AND LOWER
ISSUE CORRECTION
Not enough water in reservoir Bring water level up to at least 24” at fountain
Water coming over the float Check fountain float for water, replace if any
IF FOUNTAIN HUMMING - RUNNING
ISSUE CORRECTION
Normal running Nothing
IF FOUNTAIN HUMMING - NOT RUNNING
ISSUE CORRECTION
Intake plugged Clean intake
Voltage not high enough for starting Make sure voltage at receptacle is 120V+-5%
Fountain impeller stuck Remove fountain, clean replace impeller.
IF LIGHTS TURN ON AND OFF INTERMITTENTLY
ISSUE CORRECTION
Water in fixtures Contact The Pond Guy ® for repair/replacement
Photocell defective Replace photocell
LED bulb driver failed Contact The Pond Guy ® for repair/replacement
IF ALL LIGHTS DIM
ISSUE CORRECTION
Voltage not high enough for starting Make sure voltage at receptacle is 120V+-5%
IF ONE OR MORE (NOT ALL) LIGHTS DIM
ISSUE CORRECTION
Water in fixtures Contact The Pond Guy ® for repair/replacement
Photocell defective Replace photocell
LED bulb driver failed Contact The Pond Guy
®
for repair/replacement
IF ALL LIGHTS OFF
ISSUE CORRECTION
GFCI Tripped Reset GFCI
Power Cord Cut Repair or replace power cord
Water in fixtures Contact The Pond Guy ® for repair/replacement
Voltage not high enough for starting Make sure voltage at receptacle is 120V+-5%
Timer not running Verify timer is keeping time, replace timer if not
Timer trippers are not set correctly Set on / off trippers correctly
Photocell defective Replace photocell
IF ONE OR MORE (NOT ALL) LIGHTS OFF
ISSUE CORRECTION
Water in fixtures
Contact The Pond Guy
®
for repair/replacement LED bulb driver failed
LED Bulb failed
IF LIGHTS FLICKER
ISSUE CORRECTION
Water in fixtures Contact The Pond Guy
®
for repair/replacement
Voltage not high enough for starting Make sure voltage at receptacle is 120V+-5%
LED bulb driver failed Contact The Pond Guy
®
for repair/replacement
5A
ENGLISH