THE-ONE RS3, Instruction Manual For Use

Page: 39 / 68

This manual contains important information about safety and performance services.
We ask for your cooperation in the case of any differences or non-compliance with the manual.
Please read the warnings and precautions contained in this manual before using the THE
ONE e-Bike.
If you lend your electric bicycle to others for use, let users carefully read the instructions in
order to minimize the possibility of accidents.
Wear appropriate and qualified helmets while using the E-bike.
Always wear at least one suit with a fluorescent or reflective strip when driving under poor
light conditions. Always check that the front and rear lights are working, that the brakes are
working properly. Turn on the lights in dark or poor visibility. If you cannot turn on the lights, it is
advisable to bring the bike by hand (walking). In case of rain and/or snow, it is recommended
to brake in advance, reduce speed, and increase the safety distance.
Acceleration is one of the main causes of bicycle accidents. Therefore, speed limits must be
respected and the speed limit of 25 km/h must never be exceeded even when descending.
This e-Bike is made in compliance with all current regulations and in particular:
the European directive 2002/24 / EC which defines pedal assisted electric bicycles equipped
with an electric auxiliary motor having a continuous nominal power of up to 250 watts, the
power supply of which is reduced and finally interrupted when the vehicle reaches 25 km / h
or earlier if the cyclist stops pedaling.
The engine must never be in operation when the passenger stops pedaling.
This e-BIKE is made respecting all the regulations in force and in particular:
• Activation of the motor only in the presence of the pedal stroke (pedal assisted)
• Maximum speed 25 Km/h
• Power less than 250 watts
Do not touch the parts of the bicycle and battery power, or use metal to touch parts of the
bike,
as this can cause a dangerous short circuit.
If you want to increase your mileage, pay attention to the correct tire pressure, try to pedal
consistently and maintain a stable speed. Brake when necessary and do not wait to be too
close to those in front of you or to the point where you want to stop.
Avoid exposure to strong sun and rain, avoid places where the temperature is too high or the
corrosive gas is present. This is to avoid surface damage and chemical corrosion of paint and
electrical components which can, in turn cause malfunctions and accidents.
The driver must be able to understand the potential dangers when using the e-bike.
For the minimum driving age, refer to the national laws. Bringing a second person
aboard the e-bike is strictly prohibited.
WE RECOMMEND THAT YOU DO NOT TO MODIFY
THE TECHNICAL CHARACTERISTICS OF THE E-BIKE!
1. Important information