The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Larkin Toddler Rail
Assembly Instructions
Page 6 of 6
Made in China - r11
Once the toddler rail is in use, periodically check to make sure all bolts are tight, and tighten as necessary. Keep
these instructions for future use.
MAINTENANCE
Upon completion of assembly, be sure all screws, bolts and fastening devices have been tightened securely.
Periodically repeat this check to make sure all screws, bolts and fastening devices are tight. Before each usage or
assembly, inspect toddler rail for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use
toddler rail if parts are missing or broken. DO NOT substitute parts. DO NOT make any alteration to this toddler rail.
CLEANING
Mix together a mild solution of gentle dishwashing liquid and water, apply to toddler rail surface using a soft clean
cloth lightly dampened in the solution. Rinse with clean water again using a soft clean cloth, then dry all surfaces
thoroughly with a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS, STEEL WOOL OR COARSE RAGS
SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
STORAGE
After completing the assembly process you are advised to read and beware of all WARNINGS, CAUTIONS,
CLEANING, STORAGE, USE AND MAINTENANCE notices contained in these instructions. For long term storage of
the toddler rail, store in a cool, dry place and keep away from moisture and extreme temperature changes.
CLEANING AND CARE:
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Periodically check and tighten hardware as necessary.
