5
6
Position toddler bed assembly upright as shown. At this point, fully tighten all
bracket
and
panel bolts
.
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Larkin Toddler Rail
Assembly Instructions
Page 4 of 6
Made in China - r11
NOTE: Make sure the holes of the end panels
line up with the holes of the front/back panels
before hand tightening
B
A
A. Attach
side panel
and
toddler rail
to
end panel
with 6
panel bolts
. Secure, but do not over tighten, bolts with a
small Allen wrench
.
B. Attach
ide panel
and
toddler rail
to
end panel
with 3
bracket bolts
as shown. Secure, but do not fully tighten, bolts
with a
large Allen wrench
. At this point, position
toddler bed
upright and secure, but do not over tighten, bolts.
B
A