MAINTENANCE
WARNING
Improper maintenance and storage of the trailer may void your warranty.
•
After each use clean material out of hopper.
•
Rinse/dry inside and outside of the sweeper after each use.
•
Periodically check all fasteners for tightness and replace any damaged fasteners.
•
Check brushes for debris and keep brushes and brush shaft clean for optimal performance.
•
Twice a year apply a few drops of light multipurpose oil to the brush shaft bearings.
•
Annually clean and lightly lubricate all moving parts.
•
Every two years remove and clean gears and apply an even coat of light synthetic grease.
•
Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
•
Never exceed the hopper load capacity rating it will damage the bag.
•
Regularly grease axle and wheel bearing area or when needed.
IMPORTANT:
If a part needs replacement, only use parts that meet the
manufacturer’s specifications. Replacement parts
that do not meet specifications may result in a safety hazard or poor operation.
LUBRICATION
The bearings in the sweeper have been pre-lubricated at the factory; however, it is recommended that a few
drops of light multipurpose oil should be added to the brush shaft bearings twice a year. Also, every two years
the wheels should be removed to clean the gears. After cleaning the gears, apply an even coat of light
synthetic grease.
WHEEL GEARS/PAWL SERVICE
NOTE: To remove wheel, use a screwdriver to pop off hub cap, remove the lock nut and washer.
DO NOT remove both wheels at the same time.
Remove one wheel at a time to prevent mixing parts or using
the wrong parts as the left and right wheels and parts are different. When removing gears, carefully note the
position of all washers and other parts.
Summary of Contents for THTLS42
Page 26: ...NOTES ...
Page 27: ......
