STEP 7 -
MOUNT THE CONNECTING ROD TO THE SWEEPER HOUSING
Mount the connecting rod using two Hex Bolts M6x12 (
I
) and Nylon Lock Nut M6 (
H
) to the upper most
mounting holes of the sweeper housing.
Tighten securely
.
STEP 8 - ASSEMBLE HOPPER BAG
•
Unroll the hopper bag and place on the ground with the nylon fabric facing up and the heavy-duty nylon
floor facing the ground.
•
Inspect the first rear hopper tube (part 15) and locate the brace holes. Pass the tube through the six
sewn-in bag loops at the top of the inside of the hopper bag with the brace holes facing downward.
•
•
Pass the upper hopper side tubes through the stitched sleeves on either side of the nylon fabric. On each
side, insert the upper hopper side tube into the rear hopper tube, oriented downwards, and fasten plastic
plugs (Z).
Summary of Contents for THTLS42
Page 26: ...NOTES ...
Page 27: ......
