The Handy THS125, Operator'S Manual And Parts List

Page: 8 / 24

- 8 -
STEP 1: Installing the Wheels
1. On the left side of the axle install a wheel bushing and wheel spacer onto the axle.
2. Slide a wheel over the axle.
3. Put a Ø16 flat washer over the axle, insert the cotter pin through the hole and secure by bending.
4. On the right side of the axle slide a wheel bushing and the wheel spacer onto the axle.
5. Put a wheel over the axle, line up the holes and insert the drive pin through sleeve and lock.
6. Put a Ø16 flat washer over the axle, insert the cotter pin through the hole and secure by bending.
NOTE: Four additional flat washers are provided for adjusting the gap between the wheels.
Assembly Instructions