BEFORE OPERATING THE MACHINE
Read the engine manual, ensuring the oiling and fueling of the machine are followed completely.
STARTING AND OPERATING THE MACHINE
•
Start the engine at half throttle and let it warm up for 3 minutes approx. Then put the engine on
full throttle. For correct use of the engine, always refer to the engine manual.
•
Put the branches in the input tube and when you feel they are pulled in by the rotating blades,
let the branch go. Do not hang on to the branch, the branch will be pulled in by the machine.
WARNING
In case of emergency or any doubt, immediately activate the safety switch (red knob) to be found
by the engine (fig.11).
WARNING
Before starting the engine check that the bolts holding the input and output tubes are fully
tightened (fig.12 & 13).
Fig.13
